1. After opening the box and taking the item out, unscrew the screws from the mounting plate.
2. Push the mounting plate upward and remove it.
3. Here are the parts and tools you should prepare before mounting it on the wall.
4. For Square, tighten the card reader with the screw. For Stripe, mount the card reader using the extra mounting part provided in the box.
5. Align the bracket with the kiosk and screw them together.
6. Align the holes on the bracket with the holes on the wall and mount the bracket
7. Align the holes on the bracket with the screws on the kiosk and hang the kiosk on the wall mount bracket. Slide the kiosk from top to bottom to ensure it is centered and fits properly.
8. Tighten the screws on the back to ensure the kiosk is securely connected to the wall mount.
9. (Recommended)
10. WIFI Connection (Not recommended)
We greatly discourage you from using a wifi connection as the metal frame of the kiosk is known to interfere with the WiFi signal. Because of this we reccomend that, if you have no other choice, to hardwire the kiosk into a Wifi Extender instead as this will provide a much better experience. If you wish to accept the risk that your payments may not go through, boot up the kiosk and click "OS Tools" on the home screen. Navigate to Internet settings and connect to Wi-Fi. Please note that we highly recommend a wired connection, as the kiosk requires a stable internet connection.
Navigate to OS Tools
Click Network Manage and connect with your WIFI.
Here's the full video for installation: